Dual Supply Lighting Distribution Box

• Outlets rated 16A 230V. Total system rating 16A.
• Large capacity input terminals can accept 3 x 2.5mm², 2 x 4mm² or 1 x 6 mm² conductors.
• 7-pole – ideal for on/off or dimming control
• End outlet can be used as a spare, or to plug-in additional units.
• All units come with unique snap on/off single point fixing brackets.

If you want to add extra luminaires at any stage you just need to plug an Expansion Box into your Dual Supply Box to provide extra outlets. Extra outlets will be added to Supply Group B.

If you want to control an extra group of luminaires separately, share just power from your Dual Supply Box using a Supply Tap-off Box.

You can plug them in direct unit-to-unit, or via a lead.

Using flex7 plug-in control devices c/w integral emergency luminaire test means 2 x permanent live, 2 x neutral and 2 x earth are required.

Note. Although the 2 supplies have different protective devices, they must be the same phase.

Using flex7 plug-in control devices without integral emergency luminaire test means 2 x permanent live, 2 x emergency live, 2 x neutral and 2 x earth are required.

Note. Although the 2 supplies have different protective devices, they must be the same phase.

Using more traditional hard-wired control and emergency luminaire test means 2 x permanent live, 2 x emergency live, 2 x neutral and 2 x earth 2 x switch lives are required.

Note. Although the 2 supplies have different protective devices, they must be the same phase.

Incorporating alongside a centralised control system means 2 x permanent live, 2 x neutral and 2 x earth 2 x control pair (if desired) eg. DALI are required.

Note. Although the 2 supplies have different protective devices, they must be the same phase.

Standard flex7 wiring configuration for all 14 terminals in a Dual Supply Distribution Box.

Note: Although the 2 supplies will have different protective devices, they must be the same phase.