Networking Sensors

We have a range of Lighting Control Modules that can be networked together in order to share signals over rooms and areas; circuits and phases. This means that luminaires can all be held on in linked areas, turned off with a single switch, emergency test can be initiated on multiple circuits of luminaires simultaneously etc.

If your Control Modules have integrated emergency test then 1 key switch can initiate the test on multiple Control Modules, even if they’re controlling luminaires on different circuits, or even different phases.

Useful for large areas controlled by many individual Control Modules, on different circuits. Occupancy anywhere in the networked area will operate all lights.

Use with a flex7 Corridor Hold Box to operate and hold corridor luminaires on if any adjacent areas are occupied

All lights in a building or area can be turned off with a single switch, as you leave the building

A Y Adaptor is needed to connect the leads to the Control Modules. Contact flex7 for further advice.