Case study Archives

flex7 lighting connection and control products we designed for use in commercial and industrial buildings. Below you can find information on a selection of projects they have been used in:

Harlesden Picture Palace

Becca Garton2026-09-14T08:50:18+00:00September 2nd, 2026|

A Zonelite Lighting Control Module with a Scene Set Plate was used for the hall space. The ZoneLite makes it possible to connect and control 4 groups of luminaires from a central point. It’s pre-configured with 15 on-site selectable lighting scenarios so there’s one to suit most installation requirements.

SuperVettura Showroom, Sunningdale

Becca Garton2026-07-20T14:22:14+00:00July 20th, 2026|

The new purpose-built SuperVettura flagship showroom in Sunningdale, Berkshire, is a two-story facility designed to showcase up to 32 Koenigsegg vehicles, including examples spanning the marque's history. Opened in February 2026 following a £6.5 million investment, the showroom combines premium automotive presentation with advanced lighting technology.

FutureMeds, Utopia House, London

Becca Garton2026-07-20T14:22:49+00:00February 9th, 2026|

'We at M.I Electrical Contractors installed a flex7 system for the first time as an alternative to the stand-alone systems we had previously installed. It was a good decision, the product, the operation and the continued support made it a joy to install and more importantly ended with a very satisfied client.'

Seamab School, Kinross-shire

Becca Garton2026-07-20T14:23:30+00:00November 5th, 2025|

Classrooms in the new building are all open ceilinged, meaning that the lighting connection and control system can not be hidden behind ceiling tiles. To get around this problem Dual Control Lighting Distribution Boxes are being installed in connected WCs (which do have a suspended ceiling) to discreetly share power between the 2 areas.

Stratton House 6th Floor, Mayfair

Becca Garton2026-07-20T14:24:04+00:00May 14th, 2025|

"Our client is really happy with their new lighting and the fact that they now have full control of it and can undertake changes if required rather than having to call out an expensive engineer on the old, closed protocol system that was installed"

Cherwell Council Offices

Becca Garton2026-07-20T14:24:39+00:00April 15th, 2025|

There are 2 meeting rooms, with a folding partition which can be pulled back to create 1 single room. A solution was needed that would allow the luminaires to be controlled as 2 separate groups when the partition is in place, or as a single group of lights when the partition is removed.

Chapel Hill Primary School, Basildon

Becca Garton2025-01-14T12:03:39+00:00July 10th, 2024|

flex7 were able to provide a solution that avoided having to use a fully addressable DALI system, which would have involved time consuming & expensive design and commissioning.

BUPA Cromwell Hospital

Becca Garton2024-05-20T13:24:33+00:00May 20th, 2024|

Cromwell Hospital is state-of-the-art private healthcare facility in Kensington, London. The newly refurbished Chemotherapy Day Unit includes an open plan welcome and reception area and treatment bays. The refurbishment is part of a larger scale hospital expansion.

HCA Healthcare, 40 Bank Street, Canary Wharf

Becca Garton2025-04-23T12:44:18+00:00May 15th, 2024|

An expansion of its existing outpatient and diagnostic centre in Canary Wharf, an £18 million investment will see a new state-of-the-art facility at 40 Bank Street.

Hartham Leisure Centre

Becca Garton2024-01-31T14:52:41+00:00July 5th, 2023|

The £9m refurbishment project involves a new 2-storey extension, [...]

12 Next

Case Studies