IP66 PIR Sensor Heads
Use in external installations where protection from moisture is needed. Flush mount through a 34mm dia. hole into the ceiling, bulkhead, canopy etc. Sensor head comes prewired with 5m lead. Note: Control Module is IP2X and must be installed in a suitable location.![flex7 IP65 PIR Sensor head](https://www.flex7.co.uk/wp-content/uploads/2024/04/IP65-light-level-for-website-1.jpg)
IP66 PIR Absence/Occupancy Sensor Head (Primary)
![flex7 IP66 PIR sensor head flex7 IP66 PIR sensor head](https://www.flex7.co.uk/wp-content/uploads/2024/04/IP65-light-level-for-website.jpg)
- Use (in conjunction with appropriate Control Module) for occupancy or absence.
- The integral infra-red receiver accepts commands from either the Setup or User Remote Control. An LED provides indication of operation.
- Supplied complete with factory connected 5 metre Sensor Lead.
Ordering info
Product description | Part number |
---|---|
IP66 PIR occupancy sensor head, white | FNH200/IP66/F |
IP66 PIR occupancy sensor head, black | FNH200/IP66/F/BK |
IP66 PIR Absence/Occupancy & Light Level Sensor Head (Primary)
![flex7 IP65 PIR Sensor head flex7 IP65 PIR Sensor head](https://www.flex7.co.uk/wp-content/uploads/2024/04/IP65-light-level-for-website-1.jpg)
- Use (in conjunction with appropriate Control Module) for occupancy or absence with daylight dependency/linking. Once a target light level has been set, the Sensor Head will monitor ambient light and turn on/off or dim/brighten luminaires as required.
- The integral infra-red receiver accepts commands from either the Setup or User Remote Control. An LED provides indication of operation.
- Supplied complete with 5 metre Sensor Lead.
Ordering info
Product description | Part number |
---|---|
IP66 PIR occupancy + light level sensor head, white | FNH400/IP66/F |
IP66 PIR occupancy + light level sensor head, black | FNH400/IP66/F/BK |
IP66 PIR Auxiliary Sensor Head
![IP65 auxiliary PIR sensor head for website](https://www.flex7.co.uk/wp-content/uploads/2024/04/IP65-auxiliary-PIR-sensor-head-for-website.jpg)
- Use to increase the area of detection. Up to 5 Auxiliary Heads can be used in conjunction with 1 ‘Primary Head’, effectively increasing detection range by 6-fold. Ideal for use in corridors or large/irregular shaped rooms.
- Can be used with PIR or Microwave Sensors (excl. 230V version).
- Supplied with a ‘Y’ adaptor to allow plug-in connection of 2 Sensor Leads (in/out).
- Requires a ‘Primary’ Sensor Head and Control Module to operate.
- Supplied complete with factory connected 5m Sensor Lead
Ordering info
Product description | Part number |
---|---|
IP66 PIR auxiliary sensor head, white | FNH/AUX/IP66/F |
IP66 PIR auxiliary sensor head, black | FNH/AUX/IP66/F/BK |